Our Heat Tape Installation Services
Some homeowners call it heat tape. Others call it heat cable. Both names refer to the same product: a heated line that warms cooler spots on your roof to keep meltwater flowing off the roof and through the gutters. Whether you need a new heating cable installation to prevent freezing, want to upgrade to a complete ice dam solution that includes your gutters, or need repairs made to your existing system, Lion Flow has a solution designed around what your home needs to keep winter runoff moving.
Roof Heat Tape Installation
Ice dams start at the roofline. We run heat tape along your eaves, rakes, and valleys, where meltwater refreezes first. The cable follows a zigzag heat tape installation pattern across the eave, the coldest section of the roof. Water keeps moving off the roof instead of backing up under your shingles.
Gutter and Downspout Heat Cable
A heated roof doesn’t help much if the gutter below it is frozen solid. We run heat cable through the gutter trough and down the downspout, keeping the drainage path open from the roofline all the way to the ground.
Heat Tape Replacement
Old cable stops putting out heat, and DIY kits often quit after a season or two. We pull the failed cable and install professional-grade replacement with heavy-duty clips and cable guards at the points that see the most wear.
Ice Dam Removal
Already have ice built up along your roof edge? We clear the existing dam first, then install a heat tape system so you are not dealing with the same thing again next winter.
Great Warranties!
Your Heat Tape Installation Comes With a Workmanship Warranty
A heat tape system carries two kinds of coverage, and they are not the same thing. Manufacturer coverage protects the cable and hardware against defects. A workmanship warranty covers the installation itself, which is the part your installer is responsible for. Every job we do includes a workmanship warranty, so if something is wrong with how your system was installed, we come back and fix it. Call for a free estimate, and we will walk you through the coverage before you commit to anything.
Our Utah Service Area
Proud To Serve Northern Utah
From the neighborhoods of Ogden and Layton to the mountain homes of Park City and Heber, Lion Flow is here to protect homes across Northern Utah. Our team covers the entire Wasatch Front and Wasatch Back within a 50-mile radius of Ogden, bringing reliable heat tape installation and ice dam removal services to both busy city streets and quiet mountain communities. Wherever you call home, you can count on us for quality work and friendly service right in your area.
Ogden, UT
Layton, UT
Brigham, UT
Salt Lake City, UT
Syracuse, UT
Clearfield, UT
Kaysville, UT
Centerville, UT
Farmington, UT
Bountiful, UT
Huntsville, UT
Willard, UT
North Ogden, UT
South Ogden, UT
West Haven, UT
Roy, UT
Searching for heat tape or heat cable installation near me? Lion Flow’s Northern Utah service area covers communities from Ogden and Layton to Park City and Heber.
Take a Look at What Our Customers Say
Don’t just take our word for it, hear from homeowners right here in Northern Utah. Our reviews and testimonials show how Lion Flow delivers reliable service, lasting results, and peace of mind for homeowners. Take a quick look and see why your neighbors trust us:
Lion Flow replaced our old gutters and the whole process was quick and easy. The crew was on time, respectful, and left everything clean. Our house looks so much better now.”
“When we built our home, we wanted gutters that would last. Lion Flow did the installation, and you can tell they take pride in their work. It feels good knowing it’s done right.”
“I used to climb a ladder every fall to clear out leaves, but not anymore. The gutter guards they installed work great. Best decision I’ve made for my home maintenance.”
Why Northern Utah Homeowners Call Us for Heat Tape
Most homeowners look into heat tape only after an ice dam has already caused damage. That means you are hiring for a job you have never hired for before. As heat tape installers covering Davis, Weber, and Box Elder counties, we know how Utah’s freeze-thaw cycles affect local roofs and how heat cables can help. We walk your roof before quoting and show you where the cable needs to run, including what a roof-only install leaves uncovered. Every job gets self-regulating cable, heavy-duty clips, and cable guards at the points that see the most wear. Call for a free estimate and a clear plan for your specific roof.
Who Installs Heat Tape in Northern Utah?
Building codes do not require homes to have heat tape, so general contractors don’t install it during new construction. And the roofer who installs your shingles generally won’t include it in that job, either. Heat tape installation is a job that often falls through the cracks, leading many homeowners across Northern Utah to turn to dedicated heat tape contractors. Although most don’t know they need it until after the first ice dam causes damage.
Lion Flow is a residential heat tape contractor that helps homeowners fill the gap between what they have and what they need to protect their home. We provide professional residential heat tape installation for single-family homes throughout Ogden, Layton, and the surrounding Wasatch Front and Wasatch Back. We also install heat cable for duplexes and small multifamily buildings on request, planning the layout around every shared roofline and downspout.
We Provide
Free Inspections & Estimates
We make it easy to get started. Lion Flow offers free inspections and estimates, so you’ll know exactly what your home needs and how much it will cost, with no pressure or surprises.
The cost of heat cable installation is different for every home and depends on the size and complexity of your roof. When we estimate installation for your home, we examine the roof’s size and structure, noting spaces where ice dams are likely to form.
We measure the length of your roof’s eave and the gutters. And we count the number of valleys, so the number you get accurately reflects the cost of installing heat tape on your roof.
When You Choose Lion Flow
Here Is What Comes With the Job
Heat tape looks simple from the ground. The parts that decide whether it works are the layout, the hardware, and the control system. None of those are visible from the driveway. We install the same way on every job, from the first walkthrough to the day the system is plugged in and tested.
Free On-Site Estimates
We come out and walk your roof, including the eaves and valleys, before giving you a price. There is no pressure to book on the spot.
Placement That Matches Your Roof
Cable runs along the eaves, rakes, and valleys, plus any low-pitch section where water tends to sit. We show you the layout before we install it.
Self-Regulating Cable
Every system includes a regulator that turns the cable on when temperatures drop and off when they climb back up. You do not manage it by hand.
Roof and Gutter Coverage
A heated roof still backs up if the gutter below is frozen. We run cable through the gutter and downspout so the drainage path stays open.
Hardware Built to Stay Put
Heavy-duty clips hold position through years of freeze and thaw. Cable guards protect the cable where it rubs, like the turn into a downspout.
Workmanship Warranty
Manufacturer coverage handles defects in the parts. Our warranty covers the installation itself, which is the part we are responsible for.
Frequently Asked Questions
What is the difference between heat tape and heat cable?
Heat tape and heat cable refer to the same product. It is an electric resistance cable installed along roof eaves and valleys, as well as through the gutter systems, to prevent ice dam formation.
Some homeowners and contractors call it “heat tape” and others say “heat cable,” but both terms describe the same type of de-icing system. So if you’re looking for heat cable installers near me, you’re looking for a contractor who installs this type of roof and gutter heating system.
Does heat tape melt all the snow off my roof?
A heat tape system is designed to create a clear drainage channel, not to melt snow off your entire roof. The cable keeps a path open from the roof’s eave through the gutter and downspout. This pathway allows meltwater to reach the ground instead of refreezing and forming a dam.
How long does a professional heat tape system typically last?
A commercial-grade, self-regulating heat cable system installed with proper hardware can last through several winters. Product lifespan varies, but quality materials and proper installation can make a significant difference in how well a system holds up over time.
Lower-cost consumer systems may not be designed for the same long-term use or demanding winter conditions. The quality of the cable, mounting hardware, installation, and ongoing exposure to snow, ice, and UV all play a role in how long a heat cable system lasts.
Do I have to manually turn heat tape on and off?
It depends on the type of heat tape system you have. Lion Flow installs a regulator with every system that monitors outdoor temperature and automatically runs the cable when conditions call for it. When temperatures rise above the activation threshold, the system shuts off on its own.
Systems without an automatic temperature controller may need to be turned on and off manually.
What kind of outlet does a heat tape system need?
Heat tape systems require an outdoor-rated outlet, usually located in the soffit area or near a downspout, with GFCI protection for safety. Many homes in Northern Utah already have a suitable outlet in the right location.
If an outlet needs to be added or relocated before installation, we coordinate with a licensed electrician partner to install the outlet before we begin heat tape installation.
How much does heat tape add to my electricity bill?
Self-regulating heat cable adjusts how much power it draws based on temperature. Your seasonal energy use will depend on factors such as the length of the system, outdoor temperatures, and how often the cable activates. Because the cable uses less power when less heat is needed, self-regulating systems can be more economical to operate than constant-wattage alternatives.
Can heat tape be installed while snow is on the roof?
Spring, summer, and fall are the recommended seasons for installation because they give installers clean, safe roof access and enough time to test the system before winter weather hits.
Mid-winter installations are sometimes possible, but roof access becomes more difficult, and testing under load is harder. Getting on the schedule in the off-season is the simplest path to a system that’s ready before the first snowstorm.
How long does a professional heat tape installation take?
Most residential installations on a single-family home wrap up in a day, though larger homes with multiple gutter runs, more valleys, or complex rooflines can take longer. Once the roof layout has been planned, your installer can give you a more accurate estimate of how long the installation will take.
Is heat tape the same thing as pipe freeze cable?
Roof and gutter heat tape is a different product from pipe freeze protection cable, which is designed to wrap around water supply pipes inside the home or in a crawl space to prevent them from freezing. The two products are built for different applications and have different installation requirements. Lion Flow only installs heat tape and heat cable for roofs and gutter systems.
Will heat tape damage my shingles?
A professionally installed heat tape system with the correct clips should not damage asphalt shingles. We use grip clips on asphalt installations, which fasten to the shingle surface without penetrating it. Shingle damage may occur if an installer uses incorrect hardware or fastens cables using methods that penetrate the roofing material.
What should I ask a heat tape contractor before hiring them?
Before hiring a contractor, ask about:
- Whether they install self-regulating cable
- What brand of regulator they typically install
- What type of clips they use for your specific roof type
- Whether cable guards are part of the installation
- What workmanship warranty they offer on the installation itself, separate from any product warranty on the cable
How do I know if my existing heat tape is still working?
Plug the system in and wait a few minutes. Working heat tape gets warm to the touch within a short warmup period. Cable that stays cold after powering on has failed. Visible icicle formation or ice buildup in the exact areas the cable is supposed to protect during cold weather is the most conclusive signal that the system is no longer doing its job.